In this case there will be multiple Flowire units with the same IP address on the network, and you need to isolate the Flowire unit which is going to be upgraded from the others in the network.įlowire upgrade - enter TFTP server addressĮnter the TFTP server IP address and select Upgrade. If there is no DHCP server on the network, the Flowire units will by default have a static IP address 169.254.1.10. You can then access the Flowire units web interface one by one and perform the upgrade. The Flowire units are automatically assigned an IP address from the network if there is a DHCP server present. You can also check the Flowire unit from you PC: If you can ping the device, but not access it via the web browser, it is an old software version and it must be upgraded via the serial interface.įlowire units with software version 4.x can be upgraded through the web interface of the Flowire or using the VS-IMT tool. Hardware version 0104 (Item: 1008080110.0104) and older has version 1.x or 2.x installed from factory, and must be updated via the serial interface.Hardware version 0105 (Item: 1008080110.0105) and newer has version 4.x installed from factory, and can be upgraded via the web interface or via the VS-IMT tool.
TFTP CLIENT WINDOWS XP HOW TO
How to determine the current software version 3 Upgrade from software version 1.x or 2.x.1 How to determine the current software version.
0 kommentar(er)
